Over 20 years manufacturing experience of Road marking machine and road marking removal machine.
sales@lxdmarking.com+86 15805293662
An average of 10 kilometers per hour can be constructed by a driving type road marking machine, while 5-6 kilometers can only be constructed by a hand push road marking machine working 8 hours a day. Take a 100km highway as an example. It takes a day to finish the project with a little overtime by using a driving type road line marking machine. Of course, in an ideal situation, the actual construction may take more time, so we will put it longer for three days. However, the traditional manual road marking equipment wants to complete the 100km road marking project in three days, even if five set manual road marking machines are used to work overtime at full power Points may not be completed.
If there is rain during the construction period, as long as the rain does not stop, the construction period will be extended indefinitely. Especially in the rainy season in the south, this kind of situation is particularly frequent. The driving type road marking machine can catch the rare good weather in this season and complete the construction in the shortest time. As long as the road marking construction is completed when the road surface is dry, there will be little impact on the marking quality after the rainstorm.
With the increasing cost of labor in China, the benefits of driving type road marking machine will become more and more welcomed. Using it to mark every day is equivalent to saving 5-6 workers 3 days' expenses. Find road line marking machine for sale via Luxinda road marking machine manufacturer.
Parameter
Feature: Hand-push, high pressure airless spraying
Fuel: gasoline
Engine: 5.5PS (Honda engine)
Pump: built-in Reversing hydraulic pump(imported from German)
Max flow: 9L/min
Max working pressure: 23MPA
It is the spray equipment with high pressure,equal discharge and airless. It use gasoline engine to drive single plunger pump to work,which can generate high pressure inside the machine.The lines are common in thickness and angles are clear. Because of the direction bar in the spraying gun, the line can be adjusted to certain width conveniently.
Engine: 5.5HP gasoline engine
Work pressure: 10-18Mpa
Max Flow: 6L/min
Spraying width: 50-300mm(single gun)
Specification:
Maximum flow: 3L/min
Rated spray pressure: 5-10mpa
Maximum spray pressure: 15mpa
Motor power: 2500w
It is the spray equipment with high pressure, equal discharge and airless. It use gasoline engine to drive single plunger pump to work, which can generate high pressure inside the machine. The spray lines are common in thickness and angles are clear. Because of the direction bar in the spraying gun, the line can be adjusted to certain width conveniently. Equipped with the computer line controller, the space between dotted lines can be changed according to the project requirements.
Engine: 9HP gasoline engine
Work pressure: 10-18Mpa
Max Flow: 18L/min
It can mark actual line,dotted line, double yellow line etc.
It is equipped with double spray gun and double paint bucket, also can add additional manual spray gun, to make it mark lines in different color at the same time.
Maximum flow: 18L×2
Maximum work pressure: 30Mpa
Spraying width: 50-900mm
Spraying thickness: 0.2-0.6mm
Work performance: Four spray guns can work together
Dimension: 1530×1230×1380mm
Net weight: 820kg
Working speed: 16km/h(move forward), 10kn/h(move backward)
Color: Yellow
Engine: Honda 5.5P
Gradeability: ≤ 60 degree
Size: 1500×660×1030mm
Weight: 80kg
Function: it can make three baseline at the same time
Max.width: 9m
Size: 1300×900×1000mm
Net weight: 128kg
It is equipped with gasoline engine which can drive the fan to work,its powerful wind pressure can clean up impurities and dust of the road.
It has the shelf to place primer barrel,which can help you complete the job of cleaning and primer painting synchronously.
It often worked with road LXD-II high pressure surface sweeping machine.
Engine: 5.5HP Honda gasoline engine
Wind wheel: turbocharging
Handle bar: adjustable
Wind power: adjustable
Wind power Max.: 12m/s
Size: 1160×680×820mm
Weight: 30kg
LXD-II priming machine is assistant equipment for road marking construction.it is equipped with gasoline engine and automatic air compressor, it has the advantage of high-efficiency,labor saving, easy operation,simple maintenance and long service life.
Engine: 5.5HP Honda gasoline engine
Max work pressure: 0.5Mpa
Spraying width: 100-450mm
Safety pressure control: Equipped with ball non-return valve to keep stable pressure
Walking speed: 65-70m/min
Size: 1300×620×950mm
Net weight: 50kg
Engine: 5.5HP Honda gasoline engine
Sweep strength: Adjustable
Wind wheel: turbocharging
Wind power: adjustable
Steel wire brush: wear-resisting and soft steel brush
Rubber wheel: Wear-resisting
Size: 1180×560×860mm
Weight: 50kg
Remove line width: maximum 30cm (adjustable from 15cm-30cm)
Operating speed: 10-20m/min (according to line thickness)
Engine: Weifang Weichai Power (Dowitz)
Power: 255 kw
Speed: 1800 r/min
Pump speed: 500 cycles per minute
Pressure: 2500bar
Engine: Weifang Weichai Power (DEUTZ)
Power: 255kw
Speed: 1800r / min
Pump speed: 500 times per minute
Pressure: 1400bar
Flow rate: 85L / min
Plunger: cemented carbide 26
High pressure seal: imported high quality molding seal
