loading

Over 20 years manufacturing experience of Road marking machine and road marking removal machine.

Products

An average of 10 kilometers per hour can be constructed by a driving type road marking machine, while 5-6 kilometers can only be constructed by a hand push road marking machine working 8 hours a day. Take a 100km highway as an example. It takes a day to finish the project with a little overtime by using a driving type road line marking machine. Of course, in an ideal situation, the actual construction may take more time, so we will put it longer for three days. However, the traditional manual road marking equipment wants to complete the 100km road marking project in three days, even if five set manual road marking machines are used to work overtime at full power Points may not be completed.

 

If there is rain during the construction period, as long as the rain does not stop, the construction period will be extended indefinitely. Especially in the rainy season in the south, this kind of situation is particularly frequent. The driving type road marking machine can catch the rare good weather in this season and complete the construction in the shortest time. As long as the road marking construction is completed when the road surface is dry, there will be little impact on the marking quality after the rainstorm.

 

With the increasing cost of labor in China, the benefits of driving type road marking machine will become more and more welcomed. Using it to mark every day is equivalent to saving 5-6 workers 3 days' expenses. Find road line marking machine for sale via Luxinda road marking machine manufacturer.

Send your inquiry
LXD1050 road marking remover
Engine: 11.0HP(hand starting air-cooled four stroke gasoline engine)
Working width: 180mm
Working thickness: adjusted according to the situation of road surface,normally less than 3mm
Work efficiency: 600-800m²per day
Working life of Grinding head: 20,000m-30,000m
Driving Method: Self propelled
Strength: strong, middle or weak(adjusted)
Weight: 162kg
Size: 1200×650×980mm
LXD900 road marking remover
LXD900 road marking paint remover is mainly used to remove cold paint lines. The imported Tupungato steel cutter head is hard and rotates fast. The cutter head has long operating life, and it is convenient to load and unload it.
LXD90-3B high pressure water blasting road marking removal with suction system
Diesel engine: DEUTZ
Power: 120KW
Remove speed: 5-7m/min
Remove width: 150-250mm
Suction system: German Technology
Open-type: non-pressure tank,can remove solid waste under construction
Suction pressure: -0.4
Booster pump: Max. 6KG
LXD90-3 high pressure water jetting road marking remover
It is used for removing all kinds of road marking lines with its high pressure water. It has advantages of easy operation, simple maintenance, high efficiency, without damaging road surface,environment friendly.
LXD-23CX Ride on type road marking removal
LXD-23CX Ride on type road marking removal is the best stripper in the history of mechanical stripper. The machine is characterized by low failure rate, high efficiency, no need to replace bearings, good road grinding effect, easy maintenance and so on. This machine has various tool head modes, which can meet the requirements of various road surfaces.
LXD-618 Driving type thermoplastic(convex) road marking machine
Working pressure: 7bar, Silent safety valve
Power Systems: 12V
Thermoplastic container: 0.39m³, with hydraulic agitator (According to customer requirements)
Heating method: Gas heating
Additional equipment: Available with 15.20.30.40cm scraper, oscillating bucket (customized as required)
Additional equipment: On request, profiles
LXD D-390 thermoplastic road marking remover
It is professional equipment which is widely used to remove road marking lines. The machine has the advantages of strong power, high speed, easy and safe operation, low vibration, noise and dustproof etc.

Engine: 13PS Honda Gasoline Engine
Working width: 225mm
Grinding thickness: adjusted according to the situation of road surface, normally less than 3mm
Quantity of cutter: 78 pieces
Cutter: Imported superalloy cutter, lifetime: 10000m²
No. of shaft: 6 pieces
no data
We specialize in providing road marking machine, road marking removal machine products, and road marking solutions.
Contact Us
Add:
Shangshi Road,Shangdang Town,Zhenjiang City,Jiangsu Province,China
Sales Manager: Bruce Zhang
Mob:+86 15805293662
Company name:  Jiangsu Luxinda Traffic Facilities Co.,Ltd.
Copyright © 2025 Jiangsu Luxinda Traffic Facilities Co., Ltd.  - www.lxdmarking.com | Privacy Policy  Sitemap
Customer service
detect