Over 20 years manufacturing experience of Road marking machine and road marking removal machine.
sales@lxdmarking.com+86 15805293662
Road Marking Machine
Road marking machine is a kind of road construction machine widely used in roads, high integrity roads, parking lots, squares and runways, which marks different restrictions, guidelines and warnings on the flat ground. The marking machine has played a huge role in urban planning and highway construction with its advantages of fast, efficient and accurate, which has saved the construction period and economic investment of pavement construction to the greatest extent.
Highway is divided into highway, first class highway, second class highway and third class highway in China. There are five grades of highway and class IV Highway.
Many marking construction teams are proud of their experience in high-grade highway marking projects. So, what kind of marking machine should be used in highway marking? Welcome discuss with Luxinda road marking machine manufacturer & supplier.
Send your inquiry
It is special equipment to normal temperature paint construction. It is suitable for roads, highway, parking lot,airport, station. It can mark a straight line, dotted line, curve, zebra crossing, arrows, etc.
It is the spray equipment with high pressure,equal discharge and airless. It use gasoline engine to drive single plunger pump to work,which can generate high pressure inside the machine.The lines are common in thickness and angles are clear. Because of the direction bar in the spraying gun, the line can be adjusted to certain width conveniently.
Engine: 5.5HP gasoline engine
Work pressure: 10-18Mpa
Max Flow: 6L/min
Spraying width: 50-300mm(single gun)
It is the spray equipment with high pressure,equal discharge and airless. It use gasoline engine to drive single plunger pump to work,which can generate high pressure inside the machine.The lines are common in thickness and angles are clear. Because of the direction bar in the spraying gun, the line can be adjusted to certain width conveniently.
Engine: 5.5HP gasoline engine
Work pressure: 10-18Mpa
Max Flow: 6L/min
Spraying width: 50-300mm(single gun)
Super electric cold spray road marking machine for high pressure and flow type airless spraying machine, the machine takes power, easy to operate, energy saving, environmental protection, cost saving, a full of electricity can last 4 hours, suitable for parking lot, gas station, property community marking job.
Specification:
Maximum flow: 3L/min
Rated spray pressure: 5-10mpa
Maximum spray pressure: 15mpa
Motor power: 2500w
Specification:
Maximum flow: 3L/min
Rated spray pressure: 5-10mpa
Maximum spray pressure: 15mpa
Motor power: 2500w
It is special equipment to normal temperature paint construction. It is suitable for roads, highway, parking lot, airport, station. It can mark a straight line, dotted line, curve, zebra crossing, arrows, etc.
It is the spray equipment with high pressure, equal discharge and airless. It use gasoline engine to drive single plunger pump to work, which can generate high pressure inside the machine. The spray lines are common in thickness and angles are clear. Because of the direction bar in the spraying gun, the line can be adjusted to certain width conveniently. Equipped with the computer line controller, the space between dotted lines can be changed according to the project requirements.
Engine: 9HP gasoline engine
Work pressure: 10-18Mpa
Max Flow: 18L/min
It is the spray equipment with high pressure, equal discharge and airless. It use gasoline engine to drive single plunger pump to work, which can generate high pressure inside the machine. The spray lines are common in thickness and angles are clear. Because of the direction bar in the spraying gun, the line can be adjusted to certain width conveniently. Equipped with the computer line controller, the space between dotted lines can be changed according to the project requirements.
Engine: 9HP gasoline engine
Work pressure: 10-18Mpa
Max Flow: 18L/min
It is designed for large-scale road, especially apply to city road, airport and express way etc.
It can mark actual line,dotted line, double yellow line etc.
It is equipped with double spray gun and double paint bucket, also can add additional manual spray gun, to make it mark lines in different color at the same time.
Maximum flow: 18L×2
Maximum work pressure: 30Mpa
Spraying width: 50-900mm
Spraying thickness: 0.2-0.6mm
Work performance: Four spray guns can work together
Dimension: 1530×1230×1380mm
Net weight: 820kg
It can mark actual line,dotted line, double yellow line etc.
It is equipped with double spray gun and double paint bucket, also can add additional manual spray gun, to make it mark lines in different color at the same time.
Maximum flow: 18L×2
Maximum work pressure: 30Mpa
Spraying width: 50-900mm
Spraying thickness: 0.2-0.6mm
Work performance: Four spray guns can work together
Dimension: 1530×1230×1380mm
Net weight: 820kg
Why walk while you can seat? Use boost vehicle connect the road marking machine, the work efficiency will improve 2-3 times.
Working speed: 16km/h(move forward), 10kn/h(move backward)
Color: Yellow
Engine: Honda 5.5P
Gradeability: ≤ 60 degree
Size: 1500×660×1030mm
Weight: 80kg
Working speed: 16km/h(move forward), 10kn/h(move backward)
Color: Yellow
Engine: Honda 5.5P
Gradeability: ≤ 60 degree
Size: 1500×660×1030mm
Weight: 80kg
LXD pre-marking machine is the assistant machine in road marking construction. It can mark the pre-marking freely according to the requirements of construction to avoid faulty marking. Also can accomplish 1-3 lines independently, which greatly improves the construction efficiency.
Function: it can make three baseline at the same time
Max.width: 9m
Size: 1300×900×1000mm
Net weight: 128kg
Function: it can make three baseline at the same time
Max.width: 9m
Size: 1300×900×1000mm
Net weight: 128kg
LXD-II road surface blowing machine is an auxiliary equipment for road line marking construction,which mainly used to sweep the road surface before road marking construction.
It is equipped with gasoline engine which can drive the fan to work,its powerful wind pressure can clean up impurities and dust of the road.
It has the shelf to place primer barrel,which can help you complete the job of cleaning and primer painting synchronously.
It often worked with road LXD-II high pressure surface sweeping machine.
Engine: 5.5HP Honda gasoline engine
Wind wheel: turbocharging
Handle bar: adjustable
Wind power: adjustable
Wind power Max.: 12m/s
Size: 1160×680×820mm
Weight: 30kg
It is equipped with gasoline engine which can drive the fan to work,its powerful wind pressure can clean up impurities and dust of the road.
It has the shelf to place primer barrel,which can help you complete the job of cleaning and primer painting synchronously.
It often worked with road LXD-II high pressure surface sweeping machine.
Engine: 5.5HP Honda gasoline engine
Wind wheel: turbocharging
Handle bar: adjustable
Wind power: adjustable
Wind power Max.: 12m/s
Size: 1160×680×820mm
Weight: 30kg
Primer can increase the adhesive force between paint and road surface.
LXD-II priming machine is assistant equipment for road marking construction.it is equipped with gasoline engine and automatic air compressor, it has the advantage of high-efficiency,labor saving, easy operation,simple maintenance and long service life.
Engine: 5.5HP Honda gasoline engine
Max work pressure: 0.5Mpa
Spraying width: 100-450mm
Safety pressure control: Equipped with ball non-return valve to keep stable pressure
Walking speed: 65-70m/min
Size: 1300×620×950mm
Net weight: 50kg
LXD-II priming machine is assistant equipment for road marking construction.it is equipped with gasoline engine and automatic air compressor, it has the advantage of high-efficiency,labor saving, easy operation,simple maintenance and long service life.
Engine: 5.5HP Honda gasoline engine
Max work pressure: 0.5Mpa
Spraying width: 100-450mm
Safety pressure control: Equipped with ball non-return valve to keep stable pressure
Walking speed: 65-70m/min
Size: 1300×620×950mm
Net weight: 50kg
It is used for cleaning the bleeding cement,mud,quick soil out from the road surface. It also can blow away the impurities and dust of road surface.It has advantages of improving working efficiency and save workforce.
Engine: 5.5HP Honda gasoline engine
Sweep strength: Adjustable
Wind wheel: turbocharging
Wind power: adjustable
Steel wire brush: wear-resisting and soft steel brush
Rubber wheel: Wear-resisting
Size: 1180×560×860mm
Weight: 50kg
Engine: 5.5HP Honda gasoline engine
Sweep strength: Adjustable
Wind wheel: turbocharging
Wind power: adjustable
Steel wire brush: wear-resisting and soft steel brush
Rubber wheel: Wear-resisting
Size: 1180×560×860mm
Weight: 50kg
Working pressure: 7bar, Silent safety valve
Power Systems: 12V
Thermoplastic container: 0.39m³, with hydraulic agitator (According to customer requirements)
Heating method: Gas heating
Additional equipment: Available with 15.20.30.40cm scraper, oscillating bucket (customized as required)
Additional equipment: On request, profiles
Power Systems: 12V
Thermoplastic container: 0.39m³, with hydraulic agitator (According to customer requirements)
Heating method: Gas heating
Additional equipment: Available with 15.20.30.40cm scraper, oscillating bucket (customized as required)
Additional equipment: On request, profiles
no data
We specialize in providing road marking machine, road marking removal machine products, and road marking solutions.
Contact Us
Add:
Shangshi Road,Shangdang Town,Zhenjiang City,Jiangsu Province,China
Sales Manager: Bruce Zhang
Mob:+86 15805293662
Company name: Jiangsu Luxinda Traffic Facilities Co.,Ltd.
Copyright © 2025 Jiangsu Luxinda Traffic Facilities Co., Ltd. - www.lxdmarking.com | Privacy Policy Sitemap